-40%

USA FLAG Fits Dodge CHALLENGER Fender Bars vinyl RACING STRIPES Red White & Blue

$ 9.47

Availability: 65 in stock
  • Placement on Vehicle: Left
  • Brand: Predator Corvette
  • Refund will be given as: Money Back
  • Condition: New
  • Primary Color: Red, White & Blue
  • Returns Accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Restocking Fee: 15%
  • Country/Region of Manufacture: United States
  • Return shipping will be paid by: Buyer
  • Finish: Glossy
  • Manufacturer Part Number: PC-Challenger-Fender-RedWhiteBlue
  • Size: 4"&1.75" x 22" Qty = 3 stripes or 6

    Description

    USA FLAG Fits Dodge CHALLENGER Fender Bars vinyl RACING STRIPES Red White & Blue
    Description
    USA FLAG, Red, White & Blue Racing Stripes.
    Fits Dodge Challenger - 4" & 1.75" Fender Hash Mark Bars Racing Stripes.
    (Fits most cars and trucks.)
    Are you proud of your COUNTRY?
    Then these FLAG Racing Stripes will be perfect for you.
    Why Buy From Us?
    QUALITY MATERIALS
    We use Quality Vinyl. All weather high temperature material that is rated for 4-5 years of outdoor durability and will give you a beautiful look that will last.
    GREAT PRICES
    FAST and FREE SHIPPING
    We ship 5 days a week and ship within 24 hours of payment.
    You may choose Stars or No Stars or 1 side or both sides from the drop down menu above. A little trimming will be required to fit your car. Please email us with any questions.
    Made by the owner of the Predator Corvette.
    Whats included:
    If you purchase 1 side you get:
    1. 4" x 22" = 1 Blue
    hash marks. (NOTE: the color of the stars will be the color of your car.)
    2. 1.75" x 22" = 1 Red hash mark.
    3. 1.75" x 22" = 1 White hash mark.
    If you purchase both sides you get:
    1. 4" x 22" = 2 Blue
    hash marks for each side. (NOTE: the color of the stars will be the color of your car.)
    2. 1.75" x 22" = 2 Red hash marks for each side.
    3. 1.75" x 22" = 2 White hash marks for each side.
    About the vinyl:
    Our Vinyl is a dual cast file specifically designed to provide dimensional stability and durability without the need for an over laminate. The pressure-activated adhesive allows you to re-position the film until you apply firm pressure.
    Re-positionable vinyl for trouble-free install
    Strong self adhesive, peel and stick application. Just trim off excess with razor
    Gloss smooth finish
    Stretchable with heat
    High temperature & water resistant
    Install Temp: 60F to 80F (16C to 32C)
    End Use Temp: -65F to 225F (-60C to 107C)
    Easily cleansed with water and soap
    Long lasting for around 4-5 yr outdoor / 12 yr indoor
    Installation Recommendations:
    This vinyl can be installed using 3M Primer 94 and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl.
    We would highly suggest using a 3M primer 94 or professional installation.
    Installation info:
    When installing the racing stripes, make sure the
    surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination. Dry application only.
    We are not responsible for improper installation.
    If you have any questions before you purchase, please email us.
    Installation Instructions: (NOTE: If you got the stripes with stars, the stars may wrap under your fender depending on where you place them on your car.)
    1.
    Make sure the
    surfaces that you apply the material to is smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination.
    2. You can apply the racing stripes almost anywhere on the fender you like, normally with a 1" to 1/2" gap.
    3. (NOTE: BE CAREFUL WITH THE STAR STRIPE AS IT WILL BE EASY TO BEND THE EDGES OF THE STARS BACK WHEN SQUEEGEEING THE BUBBLES OUT.) When you have the location you want to put the racing stripes, Peal off the backing from the decal (NOTE: pull off slowly.) exposing the adhesive side. Start from one side, stick the decal to the surface, then using a squeegee or a credit card wrapped in cloth to make sure it does not scratch the decal, start working your way to the other side of the decal applying pressure with the squeegee or credit card in order to remove the air bubbles. Be sure to apply pressure on the edges to make sure it is securely stuck on correctly.
    4. When the vinyl has been applied, trim the excess.
    5. If you still have air bubbles under the decal, use the squeegee or credit card to work the bubbles out. Start from the middle of the decal and work them out to the edge.
    Shipping information:
    Shipping in the USA: Free Shipping.
    International Shipping: Shipping is calculated by your Country and zip codes. USPS Priority International (6-10 Business days)
    International Buyers: We don't have knowledge of other country's laws outside of the USA so please make sure that your postal service will allow the item into your country before buying them. We are not responsible for custom taxes or levies your country may charge you.
    Pictures sell!
    Auctiva Free Image Hosting.
    Show off your items with
    Auctiva's Listing Templates
    Auctiva,
    THE simple solution for eBay sellers.
    Track Page Views With
    Auctiva's FREE Counter